Displaying 1-100 of 115 Page  1 2  |
 |
Item ID |
Photo |
Short Description |
Product Type / Details |
#
|
Price |
Notes |
Location |
| Make |
Model |
| |
|
$ |
|
 |
205222
|
2000 Mitsubishi FD25K 4,700 Lb. Forklift
|
2000 Mitsubishi FD25K 4,700 Lb. Forklift |
in Forklifts and Accessories
2000 Mitsubishi FD25K 4,700 Lb. Forklift:2000 Mitsubishi FD25K 4,700 Lb. Forklift Mitsubishi 4,700 Pound Sit Down Rider Style Forklift. Equipment Description as Follows: - Model: Mitsubishi FD25K
- Year: 2000
- Serial Number: AF18B-05002
- Engine Model: Mitsubishi S4S In-Line 4 Cylinder
- Fuel Type: Diesel
- Load Height: 188" Top of Fork to Grade
- Load Center: 24”
- Fork Blade Length: 48”
Forklift is in good running and operating condition. 2410 hours on Hour Meter. The forklift is equipped with pneumatic rear tires, solid front tires, and comes with the operator’s manual. Note: Right rear tire has a split in the side wall, but is still holding air. Additional photos available upon request. HOURS OF OPERATION: 7:30am - 4pm, Mon - Thurs contact: Bryan Fettet office: 985.783.4207 cell: 504.722.2820 email: fettetbl@dow.com Contact Bryan Fettet @ 985-783-4207 (fettetbl@dow.com) to set up an appointment to view the forklift. Sold “As Is-Where Is” with no warranties or liabilities. Dow recommends viewing to make your own determination of condition. Bidding closes on 5/30/2019 3:00pm or on Dow’s acceptance of a qualifying bid Bid posting date 4-15-2019 DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS LOAD OUT: Buyer is responsible for loading the forklift onto buyer's truck, securing the load, and logistics. Location: St. Charles, Louisiana, United States
|
1
|
|
|
 |
Saint Charles, Louisiana |
|
|
205887
|
Hyster
|
Hyster |
H80FT |
in Forklifts and Accessories
2011 Hyster H80FT Forklift :Hyster H80FT forklift
diesel, 5000 lb with clamp, 2 stage 121" mast, L/H 86", F/L 53", cab, removalbe doors, sliding windows, heater/demister, front/rear wipers/washers, fan, lights, cascade rotating fork clamp, class III, 40" width, 17.3" to 70.3 " fork spread, 2 X 6 X 48" fork truck weight 15,240lbs, fair working condition, 4227 hours, serial P005V04159J, site unit 067-04908 accepting offers till May 24 2019 at 9am eastern time
|
1
|
|
0.00 |
N* |
Buffalo, New York |
|
|
204948
|
2011 Yale Forklift - 4800 Lb. Capacity
|
2011 Yale Forklift - 4800 Lb. Capacity |
in Forklifts and Accessories
2011 Yale Forklift - 4800 Lb. Capacity :2011 Yale Forklift - 4800 Lb. Capacity Yale Sit Down Rider Style Forklift. Equipment Description as Follows: - Model: Yale GDP050VXNXRE086
- Year: 2011
- Year Purchased and Put Into Service: 2011
- Serial Number: B875V07035J
- Engine Model: Yanmar 4TNE92-NMH In-Line 4 Cylinder
- Fuel Type: Diesel
- Load Height: 171" Top of Fork to Grade
- Load Center: 24”
- Fork Blade Length: 48”
- Side Shift: Yes
- Triplex Mast Height Lowered: 86”
Forklift is in good running and operating condition. 2980 hours on Hour Meter. The maximum lift height will reach 194” (High lifts) but require reduced capacity and restricted back tilt. The forklift is equipped with pneumatic shaped solid tires, and comes with the operator’s manual. HOURS OF OPERATION: 7:30am - 4pm, Mon - Thurs contact: Bryan Fettet office: 985.783.4207 cell: 504.722.2820 e-mail: fettetbl@dow.com Contact Bryan Fettet @ 985-783-4207 (fettetbl@dow.com) to set up an appointment to view the forklift. Sold “As Is-Where Is” with no warranties or liabilities. Dow recommends viewing to make your own determination of condition. Bidding closes on 5/23/2019 3:00pm or on Dow’s acceptance of a qualifying bid Bid posting date 4-11-2019 DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS LOAD OUT: Buyer is responsible for loading the forklift onto buyer's truck, securing the load, and logistics. Location: St. Charles, Louisiana, United States
|
1
|
|
|
F* |
Saint Charles, Louisiana |
|
|
201216
|
2016 Hyster W30ZA2 Straddle Stacker
|
2016 Hyster W30ZA2 Straddle Stacker |
in Forklifts and Accessories
2016 Hyster W30ZA2 Straddle Stacker:HYSTER W30ZA2 STRADDLE STACKER
GNB CHAMPION PALLET PRO POWER PACK BATTERY 24 VOLT 42" FORKS CONTROL HANDLE 2 STAGE 144" MAST 92" L/H 6" F/H 48 LBR SIDESHIFT 34" HANG-ON WITH 4" SHIFT WIRE MESH CREEN B/U ALARM AMBER STROBE POLY TOE GUARD, 4 hours, very good condition, working, serial B495N02592R, site unit- 066-02806
accepting offers till 5/24/19 at 91 eastern time
|
1
|
|
|
|
Newark, Delaware |
|
|
191276
|
Akrion
|
Akrion |
MP-2000 |
in Machine Tools
Akrion, UP V2 MP-2000, 200mm, Cu Clean Sink:Akrion, UP V2 MP-2000, 200mm, Cu Clean Sink
Bagged & Skidded in Warehouse S/N: 5589-010
|
1
|
|
|
F* |
Singapore |
|
|
191507
|
Akrion
|
Akrion |
MP-2000 |
in Machine Tools
Akrion, UP V2 MP-2000, 200mm, Cu Clean Sink :Akrion, UP V2 MP-2000, 200mm, Cu Clean Sink
Bagged & Skidded in WarehouseS/N: 5535-010
|
1
|
|
|
F* |
Singapore |
|
|
191509
|
Akrion
|
Akrion |
MP-2000 |
in Machine Tools
Akrion, UP V2 MP-2000, 200mm, Cu Clean Sink :Akrion, UP V2 MP-2000, 200mm, Cu Clean Sink !!!MULTIPLE UNITS AVAILABLE!!! PLEASE INQUIRE S/N: 5589-03
|
1
|
|
|
|
Singapore |
|
|
191512
|
Akrion
|
Akrion |
MP-2000 |
in Machine Tools
Akrion, UP V2 MP-2000, 200mm, Cu Clean Sink:Akrion, UP V2 MP-2000, 200mm, Cu Clean Sink
|
1
|
|
|
|
Singapore |
|
|
185267
|
Akrion
|
Akrion |
UP V2 MP.2000 |
in Machine Tools
Akrion, UP V2 MP.2000, 200mm, Etch Solvent Sink:Akrion, UP V2 MP.2000, 200mm, Etch Solvent Sink ETCH SOLVENT SINK Bagged & Skidded in warehouse
|
1
|
|
|
|
Singapore |
|
|
199987
|
Applied Materials In
|
Applied Materials In |
Endura2 SiCoNi Chamber |
in Machine Tools
AMAT, Endura2, SiCoNi, Process Chamber, 300mm:AMAT, Endura2, SiCoNi, Process Chamber, 300mm
|
1
|
|
|
|
Malta, New York |
|
|
195983
|
Applied Materials
|
Applied Materials |
Elite MS MC |
in Inspection Equipment
Applied Materials, ELITE M5 MC, 300mm, e-Beam Inspection:Applied Materials, ELITE M5 MC, 300mm, e-Beam Inspection iii Multiple Units Available. Please inquire !!!
|
1
|
|
|
|
Dresden, Saxony |
|
|
203111
|
Applied Materials In
|
Applied Materials In |
Endura2 Chamber CVD ALD TiN |
in Machine Tools
Applied Materials, Endura2, 300mm, CHAMBER, CVD ALD TiN:Applied Materials, Endura2, 300mm, CHAMBER, ALD TiN Removed. Shrink Wrapped.
|
1
|
|
|
|
East Fishkill, New York |
|
|
204039
|
Applied Materials
|
Applied Materials |
SEMVision G3 |
in Inspection Equipment
Applied Materials, SEMVision G3, DR-SEM, 300mm:Applied Materials, SEMVision G3, DR-SEM, 300mm missing some of the PC's in the electronic rack Bagged & Skidded in Warehouse 2006 Vintage
|
1
|
|
|
|
Taichung, Taichung City |
|
|
200564
|
APRIL 2019 -PRICE REDUCED! 200HP MOTOR 1800 RPM
|
APRIL 2019 -PRICE REDUCED! 200HP MOTOR 1800 RPM |
in Other Motors
APRIL 2019 -PRICE REDUCED! 200HP MOTOR 1800 RPM :200HP 1800RPM 449T
PHASE/HZ: 3/60
VOLTAGE: 2300/4000
ENCLOSURE: TEFC
INS/S.F.: F/1.15
FRAME: 449T
MFG: USEM
TYPE: JC
APPROX WT: 2500LBS
PURCHASED NEW IN 2016 - NEVER USED**
PICK UP IN DEER PARK, TX; BUYER IS REPSONSIBLE FOR LOGISTICS COSTS AND SCHEDULING
|
1
|
|
7,000.00 |
F* |
Deer Park, Texas |
|
|
185298
|
Autoclean
|
Autoclean |
ISG-2000 |
in Machine Tools
Autoclean, ISG-2000, Ultrasonic Cleaner:Autoclean, ISG-2000, Ultrasonic Cleaner
|
1
|
|
|
|
Singapore |
|
|
176719
|
SELA
|
SELA |
EM2 |
in Sample Preparation
Automated TEM and SEM sample preparation system - SELA EM2:A dedicated, automated, timesaving, and user-friendly system that enables a total solution for TEM/STEM and SEM sample preparation for both cross section and plan view in a wide range of applications. Featuring cryo-cooled, dry saw process, the EM2 system prepares specimens of either crystalline or amorphous materials. The output sample is mounted onto a compatible stub that allows rework.
Tool is completed.
Used within FE & BE failure analysis
|
1
|
|
|
F* |
Regensburg, BY |
|
|
183772
|
Axcelis Technologies
|
Axcelis Technologies |
Compact II |
in Heat Treating Equipment
Axcelis Compact II, 300mm, H2 Reflow Furnace, :Axcelis Compact II, 300mm, H2 Reflow Furnace, C4 Processing. Tool ID: OVN222 Serial Number : H08046
|
1
|
|
|
F* |
Dresden, SN |
|
|
205234
|
Brooks
|
Brooks |
PRI Turbo Stocker |
in Materials Handling and Storage Equipment
Brooks Automation, 200mm, PRI Turbo Stocker:Brooks Automation, 200mm, PRI Turbo Stocker
|
1
|
|
|
|
Singapore |
|
|
201532
|
Brooks
|
Brooks |
Zaris |
in Materials Handling and Storage Equipment
Brooks, Zaris, 300mm, Mask Cleaner :Brooks, Zaris, 300mm, Mask Cleaner
In Warehouse
S/N : 0504-10350
|
1
|
|
|
|
Taichung, Taichung City |
|
|
199780
|
BTU Engineering
|
BTU Engineering |
TCAS 181-7-72-E-36 |
in Heat Treating Equipment
BTU, Ovens / Furnaces, 200mm, Controlled Atmosphere Furnace:BTU, Ovens / Furnaces, 200mm, Controlled Atmosphere Furnace
S/N: IBVT-1
|
1
|
|
|
F* |
Burlington, Vermont |
|
|
205682
|
Case Forklift - 6,000 Lb. Capacity
|
Case Forklift - 6,000 Lb. Capacity |
in Forklifts and Accessories
Case Forklift - 6,000 Lb. Capacity :Case Forklift - 6,000 Lb. Capacity Case “Construction King” Forklift, Designed for Rough Terrain Use. Equipment Description as Follows: - Model: Case 586E
- Year Built: 1988
- Year Purchased and Put Into Service: 1997
- Serial Number: JJG0251580
- Fuel Type: Diesel
- Engine Model: 4-390 In-Line 4 Cylinder
- Mast Size: 14’-3”
- Maximum Lift Height: Top of Fork to Grade: 173”
- Side Shift Equipped: 3” Each Way From Center
- Blade Length: 48”
- Load Center: 24”
Forklift is in good running and operating condition. 2283 hours on Hour Meter. The machine was serviced regularly on a fixed time based, preventive maintenance program. The forklift is equipped with pneumatic tires and has an operator’s manual. Additional photos available on request. HOURS OF OPERATION: 7:30am - 4pm, Mon - Thurs contact: Bryan Fettet office: 985.783.4207 cell: 504.722.2820 email: fettetbl@dow.com Contact Bryan Fettet @ 985-783-4207 (fettetbl@dow.com) to set up an appointment to view the forklift. Sold “As Is-Where Is” with no warranties or liabilities. Dow recommends viewing to make your own determination of condition. Bidding closes on 6/13/2019 3:00pm or on Dow’s acceptance of a qualifying bid Bid posting date 5-1-2019 DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS LOAD OUT: Buyer is responsible for loading the forklift onto buyer's truck, securing the load, and logistics. Location: St. Charles, Louisiana, United States
|
1
|
|
|
N* |
Saint Charles, Louisiana |
|
|
182727
|
Control Air
|
Control Air |
D-9-L-SM-UM-MOD 184 |
in Machine Tools
CFM 8100 OMNI, Air Lift Spares, Diaphragm Air Cylinder, :Spare Parts - CFM 1800, CFM OMNI, Diaphragm Air Cylinders
New Old Stock, Original Packaging Lot of 20.
D-9-L-SM-UM LIFT,MODEL#184 TEST PSI.=100 PSI,DECAY = 0 PSI/ # OF CYCLES =5
|
1
|
|
|
F* |
Burlington, VT |
|
|
205801
|
Clark Forklift/3625 Lb. Capacity/Model GCX20E
|
Clark Forklift/3625 Lb. Capacity/Model GCX20E |
in Forklifts and Accessories
Clark Forklift/3625 Lb. Capacity/Model GCX20E :Clark Forklift – 3625 Lb. Capacity Clark Sit Down Rider Style Forklift. Equipment Description as Follows: - Model: Clark GCX20E
- Year: 1994
- Year Purchased and Put Into Service: 1994
- Serial Number: GX230E-0949-9372FB
- Engine Make: Clark In-Line 4 Cylinder
- Fuel Type: LPG
- Load Height: 188" Top of Fork to Grade
- Load Center: 24”
- Fork Blade Length: 48”
Forklift is in good running and operating condition. 3376 hours on Hour Meter. The forklift is equipped with solid tires, and comes with the operator’s manual. Additional photos available upon request. HOURS OF OPERATION: 7:30am - 4pm, Mon - Thurs contact: Bryan Fettet office: 985.783.4207 cell: 504.722.2820 e-mail: fettetbl@dow.com Contact Bryan Fettet @ 985-783-4207 (fettetbl@dow.com) to set up an appointment to view the forklift. Sold “As Is-Where Is” with no warranties or liabilities. Dow recommends viewing to make your own determination of condition. Bidding closes on 6/6/2019 3:00pm or on Dow’s acceptance of a qualifying bid Bid posting date 5-9-2019 DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS LOAD OUT: Buyer is responsible for loading the forklift onto buyer's truck, securing the load, and logistics. Location: St. Charles, Louisiana, United States
|
1
|
|
|
N* |
Saint Charles, Louisiana |
|
|
201644
|
Commercial Dishwasher/Champion E Series/Surplus/Unused
|
Commercial Dishwasher/Champion E Series/Surplus/Unused |
in Machine Tools
Commercial Dishwasher/Champion E Series/Surplus/Unused :Commercial Dishwasher/Champion E Series/Surplus/Unused SEALED BID Champion E series commercial dishwasher (NEW/UNUSED) Model 66PW S/N RE13036887 Condition: New/Unused HOURS OF OPERATION: 6:30am - 5pm, Mon - Thurs
contact: A.J Cohea
office: 979.238.3129/cell: 979.236.1352
email: ajcohea@dow.com For viewing Contact A.J Cohea between the hours of 6:30 am – 5:00 pm, Mon – Thurs @ 979.238.3129 to set up an appointment Bidding closes on the acceptance of a qualifying bid (sealed bid) Posting date 10/16/18 LOAD OUT: Loaded on buyers transport free of charge DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS
|
1
|
|
|
|
Freeport, Texas |
|
|
155443
|
CSK
|
CSK |
630H |
in Filters
CSK Ultrapure Reverse Osmosis System:THIS IS A DEMONSTRATION LISTING ONLY: NOT FOR SALEThe system is a CSK Ultrapure Water System. This system was designed to produce 30 GPM of ASTM Type I water. Major components include: Multi Media Unit ASME Stamped, P/N N5240-30, Tag # MM-100, Tank Size 30" x 72" Manufacturer: Alamo Twin Water Softener:P/N 4059T1, Model A450FM-29T1, Tag # WS-100, Tank Size 2 ea. 30" x 72" Manufacturer: Alamo RO Pressure Vessels ASME Stamped, P/N E8L/SP3, Tag # RO-200, RO-201, RO-202, 3 ea. 8.5" OD x 338" Manufacturer: Codeline Spiral Wound RO Elements: P/N 8822HR, RO-200, RO-201, RO-202 Manufacturer: TFC RO Booster Pump: P/N 35VD1K5HO, Tag #P-200, stainless steel vertical, 5 HP, 55 GPM nominal flow Manufacturer: G&L DI Pump: P/N 2SVD1H5HO, Tag # P-201, stainless steel vertical, 5 HP 25 GPM nominal flow Manufacturer: G&L Electrical: 2 ea. panels for PLC control. One on the RO Skid and one on the Softener skid.
|
1
|
|
5,000.00 |
F* |
Edgewater, NJ |
|
|
180112
|
Hall Tank Co.
|
Hall Tank Co. |
AH-16 |
in Machine Tools
Deaerator Hall Tank Co. :Located in Louisville, KY
Hall Tank Co Deaerator
Model AH-16
SN 104-91-2
MAX Pressure 30@ 650
Year 1991
Nat’l BD. 284
Never been put in service
Contact is Paul Blackburn - PBlackburn@Dow.com
Made for Cochrane Environmental Systems
|
1
|
|
|
F* |
Houston, Texas |
|
|
196156
|
ENTEGRIS
|
ENTEGRIS |
01-026052-13 |
in Machine Tools
Entegris, 300mm FOUPs, 01-026052-13, are FM4911 Compliant 25 wafer :Entegris, 300mm FOUPs, 01-026052-13, are FM4911 Compliant 25 wafer More than 1000 available !!! Please inquire
|
1
|
|
|
|
Malta, New York |
|
|
199704
|
FEI
|
FEI |
EXPIDA |
in Inspection Equipment
|
1
|
|
|
F* |
Dresden, Saxony |
|
|
200555
|
Filter/Strainer Pot/ 23-1/4” ID x 56” overall length/Products Fabrication Inc. /
|
Filter/Strainer Pot/ 23-1/4” ID x 56” overall length/Products Fabrication Inc. / |
in Machine Tools
Filter/Strainer Pot/ 23-1/4” ID x 56” overall length/Products Fabrication Inc. /:Filter/Strainer Pot/ 23-1/4” ID x 56” overall length/Products Fabrication Inc. /QTY 1/Unused Surplus Accepting offers Manufacture date 2008 Material of construction: (shell) Carbon Steel, (strainer baskets) Stainless Steel. See attachment for additional info Dry weight: 1805 lbs. Drawings/spec sheet upon request Additional pictures available upon request HOURS OF OPERATION: 6:30am - 5pm, Mon - Thurs
contact: A.J Cohea
office: 979.238.3129
cell: 979-236.1352
email: ajcohea@dow.com For viewing Contact A.J Cohea between the hours of 6:30 am – 5:00pm, Mon – Thurs @ 979.238.3129 to set up an appointment Bidding closes on the acceptance of a qualifying bid Posting date 8/27/18 DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS LOAD OUT: This lot will be loaded onto buyer's truck free of charge. Buyer is responsible for securing the load and logistics.
|
1
|
|
|
|
Freeport, Texas |
|
|
190524
|
Fisher Sci
|
Fisher Sci |
FD400 Binder Oven |
in Heat Treating Equipment
Fisher Scientific, FD400, Precision Binder, 200mm:Fisher Scientific, FD400, Precision Binder, 200mm
|
1
|
|
|
F* |
Singapore |
|
|
194537
|
Fisher Sci
|
Fisher Sci |
FD 720 Binder Precision Oven |
in Heat Treating Equipment
FISHER Scientific, FD720, Oven, 200mm:FISHER Scientific, FD720, Oven, 200mmFISHER Scientific, FD720, Precision Oven, 200mm
In the Fab
|
1
|
|
|
F* |
Singapore |
|
|
194540
|
Fisher Sci
|
Fisher Sci |
FED720 |
in Heat Treating Equipment
FISHER Scientific, FED720, Oven, 200mm:FISHER Scientific, FED720, Oven, 200mm
Precision Binder Oven
S/N : 00-08042
|
1
|
|
|
F* |
Singapore |
|
|
189084
|
Fisher Sci
|
Fisher Sci |
FED 720 |
in Heat Treating Equipment
FISHER Scientific, FED720, Oven, 200mm:FISHER Scientific, FED720, Oven, 200mm In the Fab
|
1
|
|
|
F* |
Singapore |
|
|
205226
|
GE MOTOR 40HP 1800RPM - NEW NEVER USED
|
GE MOTOR 40HP 1800RPM - NEW NEVER USED |
in Other Motors
GE MOTOR 40HP 1800RPM - NEW NEVER USED:Purchased in 2018 - New, never used Mfg: General Electric Model# 5KS324SAA218D9 Specs: 40HP, 1800 RPM, phase/HZ 3/60, Voltage 460, Enclosure TEFC-SD, Insulation F, Frame 324TS Condition: sold “AS IS” with no warranties or liabilities. Dow recommends viewing to make your own determination of condition HOURS OF OPERATION: 8am-3pm, Mon - Thurs Contact: Jill Holder @ jholder@dow.com to set up an appointment to view only the item being offered Bidding closes on 05/15/19 at 3PM (sealed bid) or on the acceptance of a qualifying bid Posting date 4/17/19 LOAD OUT: LOADED ON BUYERS TRANSPORT FREE OF CHARGE DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS
|
1
|
|
|
F* |
Deer Park, Texas |
|
|
200554
|
Heat Exchanger/Titanium Limited/ Qty 1/Unused Surplus
|
Heat Exchanger/Titanium Limited/ Qty 1/Unused Surplus |
in Machine Tools
Heat Exchanger/Titanium Limited/ Qty 1/Unused Surplus :Heat Exchanger/Titanium Limited/ Qty 1/Unused Surplus Asking Price: $199,900 Heat Exchanger, Horizontal, 45.25in ID x 272in OAL, TEMA BJM, Shell 50psig@50/300F, Tube 150psig@50/200F, Titanium Limited, U-Stamped, NB# 524, Shell: 304/304L Stainless Steel, Tubes SB338-2 Titanium Seamless, Heating Surface 4,769sq ft. Year of manufacture: 2009 S/N C2396 Dry weight: 18190 lbs. Drawings available on request HOURS OF OPERATION: 6:30am - 5pm, Mon - Thurs
contact: A.J Cohea
office: 979.238.3129
cell: 979-236.1352
email: ajcohea@dow.com For viewing Contact A.J Cohea between the hours of 6:30 am – 5:00pm, Mon – Thurs @ 979.238.3129 to set up an appointment Bidding closes on the acceptance of a qualifying bid Posting date 8/27/18 DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS LOAD OUT: This lot will be loaded onto buyer's truck free of charge. Buyer is responsible for securing the load and logistics.
|
1
|
|
199,900.00 |
F* |
Freeport, Texas |
|
|
178296
|
Hitachi
|
Hitachi |
Microanalysis System |
in Inspection Equipment
Hitachi, Metrology, Microanalysis System 300mm:Status: Bagged and Skidded
|
1
|
|
|
F* |
Taichung, Taichung City |
|
|
178294
|
Hitachi
|
Hitachi |
AS5000 |
in Inspection Equipment
Hitachi, Metrology, Wafer Particle & Defect Analysis , AS50002, 200mm:Status: Cold Shutdown Wafer Particle & Defect Analysis system AS5000 Defect data server
|
1
|
|
|
F* |
Singapore |
|
|
205915
|
Hitachi
|
Hitachi |
S-5200 |
in Inspection Equipment
Hitachi, S-5200 SEM, :Hitachi, S-5200 SEM, In the lab. Idle.
|
1
|
|
|
N* |
East Fishkill, New York |
|
|
205916
|
Hitachi
|
Hitachi |
S-5200 |
in Inspection Equipment
Hitachi, S-5200 SEM, :Hitachi, S-5200 SEM, In the lab. Idle.
|
1
|
|
|
N* |
East Fishkill, New York |
|
|
203281
|
Hitachi
|
Hitachi |
S-5200 |
in Inspection Equipment
Hitachi, S-5200, SEM, Ultra High Resolution:Hitachi, S-5200, SEM, Ultra High Resolution
|
1
|
|
|
|
East Fishkill, New York |
|
|
192497
|
Hitachi
|
Hitachi |
S-5500 |
in Inspection Equipment
|
1
|
|
|
F* |
Malta, New York |
|
|
205920
|
Hitachi
|
Hitachi |
S-4800 |
in Inspection Equipment
Hitachi, S-8500, SEM, Failure Analysis SEM:Hitachi, S-8500, SEM, Failure Analysis SEM In Lab. Cold idle.
|
1
|
|
|
N* |
East Fishkill, New York |
|
|
178299
|
Hitachi
|
Hitachi |
Z-5700 |
in Inspection Equipment
Hitachi, Z-5700 Spectroscopy, 300mm:Status: Bagged and Skidded
|
1
|
|
|
F* |
Taichung, Taichung City |
|
|
177612
|
Hitzinger DDUPS component –Kinetic Energy Module (Choke/KIN)
|
Hitzinger DDUPS component –Kinetic Energy Module (Choke/KIN) |
in Machine Tools
|
13
|
|
|
F* |
Regensburg, BY |
|
|
202596
|
INGERSOLL RAND heat reactivated regenerative air dryers
|
INGERSOLL RAND heat reactivated regenerative air dryers |
in Machine Tools
INGERSOLL RAND heat reactivated regenerative air dryers:INGERSOLL RAND heat reactivated regenerative air dryers 1000984/9845/9846 LOCATION: Wuxi
|
1
|
|
4,503.92 |
|
Regensburg, Bavaria |
|
|
196155
|
IPG Micro
|
IPG Micro |
IX-280 ML |
in Machine Tools
IPG Microsystems, IX-280 ML, LASER Drilling System, Class4, :IPG Microsystems, IX-280 ML LASER, Class4, Laser1 
remarketing@surplusglobal.com
DOM 2015
IX-280-ML Fiber Micromachining Workstation - General Description
? IX-280-ML Workstation
? IPGM Beam Delivery System (BDS)
o Fixed Beam Configuration for High Speed Drilling Applications
? Galvo Configuration for Direct Write / Picosecond applications
? Microtech Camera
o High Magnification Inspection / Alignment Camera
o Low Magnification Process Camera
? X-Y, Z-Theta stages
? Internally Mounted IPG QCW Laser Optimized for High Speed Hole Drilling
? Internally Mounted IPG YLPP Picosecond IR Laser for Research and Development Activities
? PC Control Software
The IPG-280 laser workstation establishes a new industry standard for production rate manufacturing for high
performance laser cutting and drilling applications. This unique workstation configuration employs two separate
lasers and beam delivery systems allowing for a high degree of flexibility for process development activities.
The internal process area of the IX-280 is built around a granite structure for high precision work. All critical
components are mounted from this structure to ensure stability of optical alignment, stage motion and insensitivity
to temperature fluctuations and mechanical vibration. The granite also has vibration isolation within the system
enclosure, which provides Class 1 laser safety and houses all electrical control systems.
For high speed drilling, the system is fitted with an IPG Quasi CW fiber laser and cutting head configuration
optimized for high speed hole drilling applications
|
1
|
|
|
|
Malta, New York |
|
|
178300
|
JEOL
|
JEOL |
7555 |
in Inspection Equipment
JEOL, Defect Review, 200mm:Status: Bagged & Skidded in warehouse Parts tool. Listed as major parts missing.
|
1
|
|
|
|
Taichung, Taichung City |
|
|
178302
|
JEOL
|
JEOL |
JEM-2500SE |
in Inspection Equipment
JEOL, JEM-2500SE Microscopes, 300mm:Status: Bagged and Skidded
|
1
|
|
|
|
Taichung, Taichung City |
|
|
178303
|
JEOL
|
JEOL |
JEM-2500SE |
in Inspection Equipment
JEOL, JEM-2500SE Microscopes, 300mm:Status: Bagged and Skidded
|
1
|
|
|
|
Taichung, Taichung City |
|
|
187765
|
JEOL
|
JEOL |
JWS 7555S |
in Inspection Equipment
JEOL, JWS 7555S, Defect Review, 200mm:JEOL, JWS 7555S, Defect Review, 200mm
|
1
|
|
|
F* |
Singapore |
|
|
189689
|
JEOL
|
JEOL |
JWS-7515 |
in Inspection Equipment
JEOL, JWS-7515, 200mm, SEM:JEOL, JWS-7515, 200mm, SEM S/N: WS179028-108
|
1
|
|
|
F* |
Singapore |
|
|
203119
|
JEOL
|
JEOL |
ARM200CF Super X |
in Inspection Equipment
|
1
|
|
|
|
Malta, New York |
|
|
204276
|
KINIK
|
KINIK |
BI2 |
in Machine Tools
KINIK, BI2, Manual Polishing Pad Break In Tool:KINIK, BI2, Manual Polishing Pad Break In Tool In warehouse
|
1
|
|
|
|
Singapore |
|
|
178304
|
KLA-Tencor
|
KLA-Tencor |
ES31 |
in Inspection Equipment
|
1
|
|
|
F* |
Singapore |
|
|
178305
|
KLA-Tencor
|
KLA-Tencor |
ES32 |
in Inspection Equipment
KLA-Tencor, ES32, E-beam Inspection, 300mm:Manufactured in 2007; Status: Bagged and Skidded !!! MULTIPLE UNITS AVAILABLE!!! Please inquire
|
1
|
|
|
|
Taichung, Taichung City |
|
|
205681
|
Komatsu Forklift - 6000 Lb. Capacity
|
Komatsu Forklift - 6000 Lb. Capacity |
in Forklifts and Accessories
Komatsu Forklift - 6000 Lb. Capacity :Komatsu Forklift - 6000 Lb. Capacity Komatsu Sit Down Rider Style Forklift. Equipment Description as Follows: - Model: Komatsu FD30T-11
- Year: 1990
- Year Purchased and Put Into Service: 1990
- Serial Number: 340436A
- Engine Make: Komatsu In-Line 4 Cylinder
- Fuel Type: Diesel
- Load Height: 130" Top of Fork to Grade
- Load Center: 24”
- Fork Blade Length: 41-1/2”
- Side Shift: Yes-Broken-See Note Below
Forklift is in running condition. 8,754 hours on Hour Meter. The forklift is equipped with solid tires. Operating condition is considered fair. Lift and tilt functions are in working order. The machine is equipped with a side shift, but the lever linkage to the hydraulic cylinder is missing, and it has no operator’s manual. Additional photos available upon request. HOURS OF OPERATION: 7:30am - 4pm, Mon - Thurs contact: Bryan Fettet office: 985.783.4207 cell: 504.722.2820 e-mail: fettetbl@dow.com Contact Bryan Fettet @ 985-783-4207 (fettetbl@dow.com) to set up an appointment to view the forklift. Sold “As Is-Where Is” with no warranties or liabilities. Dow recommends viewing to make your own determination of condition. Bidding closes on 6/20/2019 3:00pm or on Dow’s acceptance of a qualifying bid Bid posting date 5-1-2019 DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS LOAD OUT: Buyer is responsible for loading the forklift onto buyer's truck, securing the load, and logistics. Location: St. Charles, Louisiana, United States
|
1
|
|
|
N* |
Saint Charles, Louisiana |
|
|
205178
|
Lot of 9 damaged Isotanks
|
Lot of 9 damaged Isotanks |
in Tanks
Lot of 9 damaged Isotanks: Iso tank # | Tare weight ( kg) | Tank material | Cladding Material | CCRU191523 | 3702 | 316SS | ALUMINUM 8/10MM | EURU191289-9 | 3490 | 316SS | Polyester GRP | EURU191286-2 | 3490 | 316SS | Polyester GRP | EURU191287-8 | 3490 | 316SS | Polyester GRP | CCRU191273-7 | 4250 | 316SS | ALUMINUM 10/10MM | CCRU191186-0 | 4380 | 316SS | ALUMINUM 10/10MM | CCRU191322-4 | 4460 | 316SS | ALUMINUM | SECU494591-0 | 4065 | 316SS | ALUMINUM 10/10MM | SECU494435-9 | 4280 | 316SS | ALUMINUM |
|
1
|
|
|
|
Illzach, Alsace-Champagne-Ardenne-Lorraine |
|
|
180274
|
Micro Control Co.
|
Micro Control Co. |
Abes IV |
in Machine Tools
Micro Control Co., Abes IV, Burn-in Oven:Micro Control Co., Abes IV, Burn-in Oven Burn-in Oven to test both VLSI and memory devices
|
1
|
|
|
|
Burlington, VT |
|
|
205906
|
Micro Control Co.
|
Micro Control Co. |
Abes Memory PreScreener |
in Machine Tools
Micro Control Co., Abes Memory PreScreener, :Micro Control Co., Abes Memory PreScreener,
|
1
|
|
|
N* |
Burlington, Vermont |
|
|
205911
|
Micro Control Co.
|
Micro Control Co. |
Abes Memory Test Tool |
in Machine Tools
Micro Control Co., Abes Memory Test Tool:Micro Control Co., Abes Memory Test Tool 2 Chambers - 16 Slots each
|
1
|
|
|
N* |
Burlington, Vermont |
|
|
204930
|
Micro Control Co.
|
Micro Control Co. |
ABES-V Burn-in tool (hot/cold capability) |
in Machine Tools
Micro Control Co., ABES-V, Burn-in tool (hot/cold capability):Micro Control Co., ABES-V, Burn-in tool (hot/cold capability)
|
1
|
|
|
|
Burlington, Vermont |
|
|
204931
|
Micro Control Co.
|
Micro Control Co. |
ABES-V |
in Machine Tools
Micro Control Co., ABES-V, Burn-in tool, 4 chamber burn-in tool:Micro Control Co., ABES-V, Burn-in tool, 4 chamber burn-in tool Hot & Cold capability
|
1
|
|
|
|
Burlington, Vermont |
|
|
204927
|
Micro Control Co.
|
Micro Control Co. |
ABES-V |
in Machine Tools
Micro Control Co., ABES-V, Large Board Burn-in Oven:Micro Control Co., ABES-V, Large Board Burn-in Oven S/N : 6001 (M-312)
|
1
|
|
|
|
Burlington, Vermont |
|
|
204928
|
Micro Control Co.
|
Micro Control Co. |
ABES-V |
in Machine Tools
Micro Control Co., ABES-V, Single Slot Burn-in Oven:Micro Control Co., ABES-V, Single Slot Burn-in Oven single slot screen tool (ambient only) In Fab. S/N: 6051
|
1
|
|
|
|
Burlington, Vermont |
|
|
205909
|
Micro Control Co.
|
Micro Control Co. |
WRP256 Oven |
in Machine Tools
Micro Control Co., WRP256 Oven:Micro Control Co., WRP256 Oven 2 Chamber 8 Slots Each Installed. Idle
|
1
|
|
|
N* |
Burlington, Vermont |
|
|
180276
|
Micro Control Co.
|
Micro Control Co. |
WRP64 |
in Machine Tools
Micro Control Co., WRP64, Burn-in Oven :Micro Control Co., WRP64, Burn-in Oven to test both VLSI and memory devices
|
1
|
|
|
|
Burlington, VT |
|
|
205910
|
Micro Control Co.
|
Micro Control Co. |
Abes Memory PreScreener |
in Machine Tools
Micro Control Co.,Abes Memory PreScreener:Micro Control Co., Abes Memory PreScreener
|
1
|
|
|
N* |
Burlington, Vermont |
|
|
205907
|
Micro Control Co.
|
Micro Control Co. |
WRP256 PreScreen Tool |
in Machine Tools
Micro Control Co.,WRP256 PreScreen Tool:Micro Control Co.,WRP256 PreScreen Tool Idle, in the lab.
|
1
|
|
|
N* |
Burlington, Vermont |
|
|
182327
|
MKS Instruments
|
MKS Instruments |
AX8559 ASTeX Generator |
in Machine Tools
MKS, ASTeX AX8550, Ozone, O3, Generator, :MKS, ASTeX AX8550, Ozone, O3, Generator,
|
1
|
|
|
|
Malta, NY |
|
|
182329
|
MKS Instruments
|
MKS Instruments |
Liquozone PrimO3 |
in Machine Tools
MKS, Liquozon, Ozone, O3, Generator, PrimO3:MKS, Liquozon, Ozone, O3, Generator, PrimO3,
|
1
|
|
|
|
Malta, NY |
|
|
204289
|
Murata
|
Murata |
Hardware/ AMHS/UTS/OHT Transport Track, BCU, PDU, |
in Materials Handling and Storage Equipment
Murata, OHT, FOUP Transport:Murata, OHT, FOUP Transport Hardware/ AMHS/UTS/OHT Transport Track, BCU, PDU, Wiring Phase II
|
1
|
|
|
|
Malta, New York |
|
|
184932
|
Pillar
|
Pillar |
UNIBLOCK CLASSIC 500 KVA UPS |
in Machine Tools
Pillar UNIBLOCK CLASSIC 500 KVA, UPS, w/ Support Equipment:Piller model UNIBLOCK CLASSIC 500 KVA Uninterruptible Power Supply, serial # 1322635Includes: Piller model MOTS800A Manual Overlap Transfer Switch, serial # 3141MOTS
Piller Battery Charger, serial # 455BC40 and DC Disconnect Switch
configured for 480 VAC input / 480 VAC three phase power, and rated for 500 kVA (400 kW)
Used to condition power for many electron beam lithography and inspection tools. Shutdown March 3, 2016. Maintained by Piller since 1988.
|
1
|
|
|
|
Burlington, VT |
|
|
194683
|
RECIF Technologies
|
RECIF Technologies |
SIS300F35 |
in Materials Handling and Storage Equipment
Recif, Wafer Sorter, 300mm, SIS300F35:Recif, Wafer Sorter, 300mm, SIS300F35 S/N : SIS300F35SN657
|
1
|
|
|
|
Singapore |
|
|
179037
|
Rorze
|
Rorze |
RV201-F05-202CE-1 |
in Materials Handling and Storage Equipment
RORZE RV201 F05 300mm Wafer Load Port :Rorze RV201-F05-202CE-1 FOUP Opening Load Port Great condition. Ready for use.
|
1
|
|
|
|
Malta, NY |
|
|
179038
|
Rorze
|
Rorze |
RV201-F05-202CE-1 |
in Materials Handling and Storage Equipment
RORZE RV201 F05 300mm Wafer Load Port :Rorze RV201-F05-202CE-1 FOUP Opening Load Port Great condition. Ready for use.
|
1
|
|
|
F* |
Malta, NY |
|
|
183767
|
Sonicar
|
Sonicar |
TS-12047HC |
in Machine Tools
SONICAR, TS-12047HC, 200mm, Degreaser:SONICAR, TS-12047HC, 200mm, Degreaser Tool ID: UDEG-AC1
|
1
|
|
|
|
Singapore |
|
|
191513
|
Sonicor Instruments
|
Sonicor Instruments |
TS-2404/402424H |
in Machine Tools
Sonicor Instrument,TS-2404/402424H, ultra sonic clean, 200mm, :Sonicor Instrument,TS-2404/402424H, ultra sonic clean, 200mm S/N: 104896-11/99
|
1
|
|
|
|
Singapore |
|
|
201645
|
Steam Table 88”/ Thurmaduke /Surplus/Unused
|
Steam Table 88”/ Thurmaduke /Surplus/Unused |
in Machine Tools
Steam Table 88”/ Thurmaduke /Surplus/Unused :Steam Table 88”/ Thurmaduke /Surplus/Unused SEALED BID Thurmaduke Steam Table 88” (NEW/UNUSED) Model TS-560-6M S/N 09123204
See other images for detailed list of components
Condition: New/Unused HOURS OF OPERATION: 6:30am - 5pm, Mon - Thurs
contact: A.J Cohea
office: 979.238.3129/cell: 979.236.1352
email: ajcohea@dow.com For viewing Contact A.J Cohea between the hours of 6:30 am – 5:00 pm, Mon – Thurs @ 979.238.3129 to set up an appointment Bidding closes on the acceptance of a qualifying bid (sealed bid) Posting date 10/16/18 LOAD OUT: Loaded on buyers transport free of charge DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS
|
1
|
|
|
F* |
Freeport, Texas |
|
|
182306
|
Suss MicroTec
|
Suss MicroTec |
HVMMFT, Mold Fill Tool, 300mm, C4, |
in Machine Tools
Suss Microtec HVMMFT, Mold Fill Tool, 300mm, C4, :Suss Microtec HVMMFT, Mold Fill Tool, 300mm, C4, solder bumpsSuss Microtec HVMMFT, Mold Fill Tool, 300mm, C4,
automated injection molded solder mold filling tool.
deposit solder in mold openings in the front face of molds.
Input and output ports (Mold Load Ports, or MLPs) which will allow mold carts to dock to the equipment in order to load and unload molds. Tool ID: MFT02
|
1
|
|
|
|
Fishkill, NY |
|
|
182280
|
Suss MicroTec
|
Suss MicroTec |
HVMMFT |
in Machine Tools
Suss Microtec HVMMFT, Mold Fill Tool, 300mm, C4, solder bumps:Suss Microtec HVMMFT, Mold Fill Tool, 300mm, C4, automated injection molded solder mold filling tool. deposit solder in mold openings in the front face of molds. Input and output ports (Mold Load Ports, or MLPs) which will allow mold carts to dock to the equipment in order to load and unload molds.
|
1
|
|
|
|
East Fishkill, NY |
|
|
184843
|
TankCar DUPX 020966
|
TankCar DUPX 020966 |
in Rail Cars
TankCar DUPX 020966:Chloroprene Tankcar - Carbon Steel Outer/Stainless Steel Inner Tank
Non-Lined with No Coils or Insulation
specialized tank car commonly referred to as a ‘Tank within a Tank’
DOT Class - 115A60W6
TARE - 99000
Weight On Rail - 263000
Capacity - 21000
UOM - Gal
Load Limit - 1640000
AAR Car Type - T135
Builder Underframe - Union Tank Car
Truck Capacity - 100; Truck Type - B252; Type Code - T
Built Date - 4/1/1994 ... End of Service Date - 4/1/2044
Truck Center Length - 582; Truck Count - 2; Axle Count - 4
Wheel Bearing Type - Roller
Stability Device Equipped - TRUE
Coupler Style - B058:D
*Car will be cleaned and certified upon approved BID
*Picture reflects one unit in a series of available cars. All units are the same
|
1
|
|
|
F* |
LaPlace, Louisiana |
|
|
184866
|
TankCar DUPX 020967
|
TankCar DUPX 020967 |
in Rail Cars
TankCar DUPX 020967:Chloroprene Tankcar - Carbon Steel Outer/Stainless Steel Inner Tank
Non-Lined with No Coils or Insulation
specialized tank car commonly referred to as a ‘Tank within a Tank’
DOT Class - 115A60W6
TARE - 101900
Weight On Rail - 263000
Capacity - 21092
UOM - Gal
Load Limit - 161100
AAR Car Type - T135
Builder Underframe - Union Tank Car
Truck Capacity - 100; Truck Type - B252; Type Code - T
Built Date - 4/1/1994 ... End of Service Date - 4/1/2044
Truck Center Length - 582; Truck Count - 2; Axle Count - 4
Wheel Bearing Type - Roller
Stability Device Equipped - TRUE
Coupler Style - B058:D
*Car will be cleaned and certified upon approved BID
*Picture reflects one unit in a series of available cars. All units are the same
|
1
|
|
|
F* |
LaPlace, Louisiana |
|
|
184867
|
TankCar DUPX 020968
|
TankCar DUPX 020968 |
in Rail Cars
TankCar DUPX 020968:Chloroprene Tankcar - Carbon Steel Outer/Stainless Steel Inner Tank
Non-Lined with No Coils or Insulation
specialized tank car commonly referred to as a ‘Tank within a Tank’
DOT Class - 115A60W6
TARE - 100500
Weight On Rail - 263000
Capacity - 21287
UOM - Gal
Load Limit - 162500
AAR Car Type - T145
Builder Underframe - Union Tank Car
Truck Capacity - 100; Truck Type - B252; Type Code - T
Built Date - 4/1/1994 ... End of Service Date - 6/1/2046
Truck Center Length - 544; Truck Count - 2; Axle Count - 4
Wheel Bearing Type - Roller
Stability Device Equipped - TRUE
Coupler Style - B058:D
*Car will be cleaned and certified upon approved BID
*Picture reflects one unit in a series of available cars. All units are the same
|
1
|
|
|
|
LaPlace, Louisiana |
|
|
184868
|
TankCar DUPX 020969
|
TankCar DUPX 020969 |
in Rail Cars
TankCar DUPX 020969:Chloroprene Tankcar - Carbon Steel Outer/Stainless Steel Inner Tank
Non-Lined with No Coils or Insulation
specialized tank car commonly referred to as a ‘Tank within a Tank’
DOT Class - 115A60W6
TARE - 100500
Weight On Rail - 263000
Capacity - 21272
UOM - Gal
Load Limit - 162500
AAR Car Type - T145
Builder Underframe - Union Tank Car
Truck Capacity - 100; Truck Type - B252; Type Code - T
Built Date - 7/1/1996 ... End of Service Date - 6/1/2046
Truck Center Length - 544; Truck Count - 2; Axle Count - 4
Wheel Bearing Type - Roller
Stability Device Equipped - TRUE
Coupler Style - B058:D
*Car will be cleaned and certified upon approved BID
*Picture reflects one unit in a series of available cars. All units are the same
|
1
|
|
|
|
LaPlace, Louisiana |
|
|
184869
|
TankCar DUPX 020970
|
TankCar DUPX 020970 |
in Rail Cars
TankCar DUPX 020970:Chloroprene Tankcar - Carbon Steel Outer/Stainless Steel Inner Tank
Non-Lined with No Coils or Insulation
specialized tank car commonly referred to as a ‘Tank within a Tank’
DOT Class - 115A60W6
TARE - 100300
Weight On Rail - 263000
Capacity - 21269
UOM - Gal
Load Limit - 162700
AAR Car Type - T145
Builder Underframe - Union Tank Car
Truck Capacity - 100; Truck Type - B252; Type Code - T
Built Date - 7/1/1996 ... End of Service Date - 6/1/2046
Truck Center Length - 544; Truck Count - 2; Axle Count - 4
Wheel Bearing Type - Roller
Stability Device Equipped - TRUE
Coupler Style - B058:D
*Car will be cleaned and certified upon approved BID
*Picture reflects one unit in a series of available cars. All units are the same
|
1
|
|
|
|
LaPlace, Louisiana |
|
|
184870
|
TankCar DUPX 020972
|
TankCar DUPX 020972 |
in Rail Cars
TankCar DUPX 020972:Chloroprene Tankcar - Carbon Steel Outer/Stainless Steel Inner Tank
Non-Lined with No Coils or Insulation
specialized tank car commonly referred to as a ‘Tank within a Tank’
DOT Class - 115A60W6
TARE - 101100
Weight On Rail - 263000
Capacity - 21269
UOM - Gal
Load Limit - 161900
AAR Car Type - T145
Builder Underframe - Union Tank Car
Truck Capacity - 100; Truck Type - B252; Type Code - T
Built Date - 9/1/1996 ... End of Service Date - 6/1/2046
Truck Center Length - 544; Truck Count - 2; Axle Count - 4
Wheel Bearing Type - Roller
Stability Device Equipped - TRUE
Coupler Style - B058:D
*Car will be cleaned and certified upon approved BID
*Picture reflects one unit in a series of available cars. All units are the same
|
1
|
|
|
|
LaPlace, Louisiana |
|
|
184871
|
TankCar DUPX 020973
|
TankCar DUPX 020973 |
in Rail Cars
TankCar DUPX 020973:Chloroprene Tankcar - Carbon Steel Outer/Stainless Steel Inner Tank
Non-Lined with No Coils or Insulation
specialized tank car commonly referred to as a ‘Tank within a Tank’
DOT Class - 115A60W6
TARE - 101300
Weight On Rail - 263000
Capacity - 21264
UOM - Gal
Load Limit - 161700
AAR Car Type - T145
Builder Underframe - Union Tank Car
Truck Capacity - 100; Truck Type - B252; Type Code - T
Built Date - 9/1/1996 ... End of Service Date - 6/1/2046
Truck Center Length - 544; Truck Count - 2; Axle Count - 4
Wheel Bearing Type - Roller
Stability Device Equipped - TRUE
Coupler Style - B058:D
*Car will be cleaned and certified upon approved BID
*Picture reflects one unit in a series of available cars. All units are the same
|
1
|
|
|
|
LaPlace, Louisiana |
|
|
184872
|
TankCar DUPX 020975
|
TankCar DUPX 020975 |
in Rail Cars
TankCar DUPX 020975:Chloroprene Tankcar - Carbon Steel Outer/Stainless Steel Inner Tank
Non-Lined with No Coils or Insulation
specialized tank car commonly referred to as a ‘Tank within a Tank’
DOT Class - 115A60W6
TARE - 100600
Weight On Rail - 263000
Capacity - 21254
UOM - Gal
Load Limit - 162400
AAR Car Type - T145
Builder Underframe - Union Tank Car
Truck Capacity - 100; Truck Type - B252; Type Code - T
Built Date - 9/1/1996 ... End of Service Date - 6/1/2046
Truck Center Length - 544; Truck Count - 2; Axle Count - 4
Wheel Bearing Type - Roller
Stability Device Equipped - TRUE
Coupler Style - B058:D
*Car will be cleaned and certified upon approved BID
*Picture reflects one unit in a series of available cars. All units are the same
|
1
|
|
|
|
LaPlace, Louisiana |
|
|
178286
|
Tec-sem
|
Tec-sem |
Practor |
in Materials Handling and Storage Equipment
Tec-sem, Practor Wafer Handling, 300mm:Manufactured in 2005; Status: Bagged and Skidded Tool ID AM-WST-01
|
1
|
|
|
|
Taichung, Taichung City |
|
|
203083
|
TEL, RLSA-H, 300mm, Chambers, 4 (FOUR) chambers,
|
TEL, RLSA-H, 300mm, Chambers, 4 (FOUR) chambers, |
in Machine Tools
TEL, RLSA-H, 300mm, Chambers, 4 (FOUR) chambers, :TEL, RLSA-H, 300mm, Chambers, 4 (FOUR) chambers, for Tactras Mainframe. Bagged & Skidded in Warehouse
|
1
|
|
|
|
Malta, New York |
|
|
203127
|
Tel
|
Tel |
Tactras Chamber |
in Machine Tools
TEL, Tactras, Chamber, 300mm, BEOL ETCH Chamber:TEL, Tactras, Chamber, 300mm, BEOL ETCH Chamber
|
1
|
|
|
|
East Fishkill, New York |
|
|
203125
|
Tel
|
Tel |
Tactras Strip Chamber |
in Machine Tools
TEL, Tactras, Chamber, 300mm, Strip Chamber:TEL, Tactras, Chamber, 300mm, Strip Chamber
|
1
|
|
|
|
East Fishkill, New York |
|
|
203126
|
Tel
|
Tel |
Tactras Chamber |
in Machine Tools
TEL, Tactras, Chamber, 300mm, Strip Chamber:TEL, Tactras, Chamber, 300mm, Strip Chamber
|
1
|
|
|
|
East Fishkill, New York |
|
|
204309
|
Tel
|
Tel |
Tactras RLSA |
in Machine Tools
TEL, Tactrax RLSA, 300mm, Etch:TEL, Tactrax RLSA, 300mm, Etch In Fab. Idle
|
1
|
|
|
|
Malta, New York |
|
|
196208
|
Unused Armstrong Engineering Vaporizer
|
Unused Armstrong Engineering Vaporizer |
in Heat Exchangers
Unused Armstrong Engineering Vaporizer :carbon steel shell, 316 ss tubes290 psi shell, 218 psi tube, 392 degf shell and tube, 120 inch long x 16" od, built 2015, not used,
drawing attached
|
2
|
|
|
F* |
Beloit, Wisconsin |
|
|
203150
|
Unused Pall Advanta ALT9 Housing -model Alta94G31CDH4,
|
Unused Pall Advanta ALT9 Housing -model Alta94G31CDH4, |
in Filters
Unused Pall Advanta ALT9 Housing -model Alta94G31CDH4, :Unused Pall 316 SS Cartridge Filter pt# ALTA94G003491, 85.5 LITER CAPACITY, WEIGHT= 81 KG, 551 mm diameter x 1924 mm high,MAWP ( internal) 150 psi @ 300F, MAWP (external) 14.5 psig @300F, MDMT - 14F @150 psi, 40 inch code 7 filter Items currently in storage in Korea Calculations and QA reports available
|
1
|
|
|
|
Circleville, Ohio |
|
|
203149
|
Unused Pall ADVANTAGE ALT12 Housing - model ALTA124G31CDH4
|
Unused Pall ADVANTAGE ALT12 Housing - model ALTA124G31CDH4 |
in Filters
Unused Pall ADVANTAGE ALT12 Housing - model ALTA124G31CDH4:Unused Pall 316 SS Cartridge Filter pt# ALTA124G003492, 136 LITER CAPACITY, WEIGHT= 142 KG, 442 mm diameter x 1850 mm high,MAWP ( internal) 150 psi @ 300F, MAWP (external) 14.5 psig @300F, MDMT - 14F @150 psi, 40" CODE 7 FILTER Items currently in storage in Korea Calculations and QA reports available
|
4
|
|
|
|
Circleville, Ohio |
|
|
203148
|
Unused Pall Advantage Alta 4 housing - model ALTA44G31CDH4
|
Unused Pall Advantage Alta 4 housing - model ALTA44G31CDH4 |
in Filters
Unused Pall Advantage Alta 4 housing - model ALTA44G31CDH4:Unused Pall 316 SS Cartridge Filter pt# ALTA44G003490, 42.75 LITER CAPACITY, WEIGHT= 35.5 KG, 373 mm diameter x 2025 mm high,MAWP ( internal) 150 psi @ 300F, MAWP (external) 14.5 psig @300F, MDMT - 14F @150 psi, pt# ALTA44G003490, 40" CODE7 FILTER Items currently in storage in Korea Calculations and QA reports available
|
1
|
|
|
|
Circleville, Ohio |
|
|
205793
|
Used one lot of 3 Ceiling Mount Projector Screens
|
Used one lot of 3 Ceiling Mount Projector Screens |
in Machine Tools
Used one lot of 3 Ceiling Mount Projector Screens:1st Screen is 9’ long
2nd Screen is 10- ½’ long
3rd Screen is 12’ long
|
1
|
|
|
F*N* |
Houston, Texas |
|
|
173885
|
USED 3800 GAL 304SS FLAT BOTTOM TANK
|
USED 3800 GAL 304SS FLAT BOTTOM TANK |
in Tanks
USED 3800 GAL 304SS FLAT BOTTOM TANK:USED 3800 GAL 304SS FLAT BOTTOM TANK, 9 FT ID X 9FT HT, CONE TOP, 30" SIDE MANWAY, MADE BY INDUSTRIAL ALLOY FABRICATORS, PRESSURE RATING - ATMOSPHERIC, TEMP RATING = -20 TO 400F, age - 2010, condition - very good,
SEE EXTENDED DESCRIPTION FOR DIAGRAM AND SPECS, tank has been de-installed as of 4/2015. verified existence 5/6/19
|
1
|
|
|
F* |
Circleville, Ohio |
|
| Displaying 1-100 of 115 Page 1 2 |
|
|
Log in
View prices in $ or ... 
ALL CATEGORIES
View 
reference document attached
Group Listings into sub-categories 
.jpg)
.jpg)
-MAIN.jpg)
-MAIN.jpg)
-MAIN.jpg)
