 |
Item ID |
Photo |
Short Description |
Product Type / Details |
#
|
Price |
Notes |
Location |
| Make |
Model |
| |
|
$ |
|
 |
199832
|
Applied Materials
|
Applied Materials |
P5000 |
in Chemical Vapor Deposition Equipment
P5000 Deposition Tool:P500047 4 Chambers
CVD standard Chambers
SNIT
|
1
|
|
|
 |
Villach, Carinthia |
|
|
201546
|
Applied Materials
|
Applied Materials |
Producer GT Chamber |
in Chemical Vapor Deposition Equipment
Producer GT, AMAT, 300mm, CVD, Cobalt Chamber Only :Producer GT, AMAT, 300mm, CVD, Cobalt Chamber Only
In the fab, Idle
S/N : 428357-DG-ACHA MISSING PARTS | UPS batteries or battery pack | Qty / Units | | missing door interlock magnet mounting nuts | 2 | | Needs GUI software work. Comes up only in safe mode. Does not follow commands | 1 | | Needs LCF | 1 | | Missing chamber A/C box cover | 1 | | Missing S1 S2 chamber wafer heater | 1 | | Missing S1 S2 heater lift mechanism | 1 | | Missing S1 S2 heater lift driver, lead screw, motor | 1 | | Several cables not connected | 1 | | top plate LL | 1 | | liner LL | 1 | | Gas distribution plate APC | 1 | | Bucket LL | 1 | | Edge ring large | 1 | | Edge ring small | 1 | | lock nut quartz tube | 1 | | tube liner AX7670 APC 300 mm Quartz tube | 1 | | STP-iXR1606 Turbo pump shutting off after few seconds . Turbo having hw problems | 1 | | Dump DI water from S1 and S2 DI water container | 1 | | S1 H2O MFC 20 sccm | 1 | | Missing DI water container cover | 1 | | RPS disconnected | 1 | | S1 lift controller not attached | 1 | | Needs LCF and Chamber D handoffs | 1 | | ChD side1 lift not mounted, harness has pulled wires | 1 | | Needs new indexer connector for side 1 | 1 | | FI lower LL door will not shut when commanded | 1 | | ChD water ampoules installed but nothing connected/plugged in | 1 | | ChD RPS units power not connected | 1 | Needs LCF and chambers handoffs for all chambers | 1 |
|
1
|
|
|
|
Malta, New York |
|
|
201552
|
Applied Materials
|
Applied Materials |
Producer SE |
in Chemical Vapor Deposition Equipment
Applied Materials, Producer SE, AMAT, 300mm, ULK:Applied Materials, Producer SE, AMAT, 300mm, ULK
3 Chamber ULK
In Fab - Idle
S/N : 422953
|
1
|
|
|
|
Malta, New York |
|
|
204490
|
Applied Materials
|
Applied Materials |
Olympia ALS |
in Chemical Vapor Deposition Equipment
Applied Materials, Olympia, SiN, LowK, ALD, 300mm:Applied Materials, Olympia, SiN, LowK, ALD, 300mm Single Chamber In the fab. Warm idle S/N: 430766 2015 Vintage
|
1
|
|
|
|
Malta, New York |
|
|
206311
|
Applied Materials
|
Applied Materials |
Endura2 CVD Co Chamber, VOLTA |
in Chemical Vapor Deposition Equipment
AMAT, Endura2, CVD Co Chambers, VOLTA, 300mm:AMAT, Endura2, CVD Co Chambers, VOLTA, CVD Co CHAMBERS ONLY - Quantity 2 New In Original Factory Sealed Boxes. In Warehouse.
|
1
|
|
|
F* |
Malta, New York |
|
|
209920
|
Applied Materials
|
Applied Materials |
Producer SE |
in Chemical Vapor Deposition Equipment
Applied Materials, Producer SE, 300mm,:Applied Materials, Producer SE, 300mm,
|
1
|
|
|
|
East Fishkill, New York |
|
|
215018
|
Applied Materials
|
Applied Materials |
Producer GT |
in Chemical Vapor Deposition Equipment
Applied Materials, Producer GT, 300mm, Frontier Etch, Nitride Poly :Applied Materials, Producer GT, 300mm, Frontier Nitride Poly Etch 3 Chamber: 1x SiCoNi PME, Frontier SMR Nitride, Frontier SMR Poly S/N : 430632 Vintage : 2015 Installed
|
1
|
|
|
|
Malta, New York |
|
|
215019
|
Applied Materials
|
Applied Materials |
Producer GT Frontier |
in Chemical Vapor Deposition Equipment
Applied Materials, Producer GT, 300mm, Frontier Nitride Poly Etch:Applied Materials, Producer GT, 300mm, Frontier Nitride Poly Etch 3 Chamber: 1x SiCoNi PME, Frontier SMR Nitride, Frontier SMR Poly S/N : 432990 Vintage : 2016 Installed
|
1
|
|
|
|
Malta, New York |
|
|
215020
|
Applied Materials
|
Applied Materials |
Producer GT Frontier |
in Chemical Vapor Deposition Equipment
Applied Materials, Producer GT, 300mm, Frontier SMR Poly:Applied Materials, Producer GT, 300mm, Frontier SMR Poly 2 Chamber: 1x SiCoNi PME, Frontier SMR Poly S/N : 435695 Vintage : 2017 Installed
|
1
|
|
|
|
Malta, New York |
|
|
215337
|
Applied Materials
|
Applied Materials |
Producer GT Frontier |
in Chemical Vapor Deposition Equipment
Applied Materials, Producer GT, 300mm, Frontier Nitride Poly Etch:Applied Materials, Producer GT, 300mm, Frontier Nitride Poly Etch 3 chamber ProducerGT Etch.
|
1
|
|
|
|
Malta, New York |
|
|
215844
|
Applied Materials
|
Applied Materials |
Producer SE EFEM & LL Only |
in Chemical Vapor Deposition Equipment
Applied Materials, Producer SE, EFEM & LL Chamber ONLY 300mm:Applied Materials, Producer SE EFEM & LL Chamber, 300mm Serial Number : 414403
|
1
|
|
|
|
East Fishkill, New York |
|
|
219076
|
Applied Materials
|
Applied Materials |
BDIIx PSICOH |
in Chemical Vapor Deposition Equipment
AMAT, Producer SE chm only (PSICOH), 300mm, S/N 402620-A:AMAT, Producer SE BDIIx chm only (PSICOH), 300mm, S/N 402620-A
|
1
|
|
|
|
East Fishkill, New York |
|
|
219077
|
Applied Materials
|
Applied Materials |
BDIIx PSICOH |
in Chemical Vapor Deposition Equipment
AMAT, Producer SE chm only (PSICOH), 300mm, S/N 402620-B:AMAT, Producer SE BDIIx chm only (PSICOH), 300mm, S/N 402620-B
|
1
|
|
|
|
East Fishkill, New York |
|
|
219078
|
Applied Materials
|
Applied Materials |
BDIIx PSICOH |
in Chemical Vapor Deposition Equipment
AMAT, Producer SE chm only (PSICOH), 300mm, S/N 402620-C:AMAT, Producer SE BDIIx chm only (PSICOH), 300mm, S/N 402620-C
|
1
|
|
|
F* |
East Fishkill, New York |
|
|
218746
|
Applied Materials
|
Applied Materials |
P5000 |
in Chemical Vapor Deposition Equipment
Amat P5000 CVD Tool:P500048 8 inch tool with 4 CVD chambers.
|
1
|
|
|
F* |
Villach, Carinthia |
|
|
219065
|
Applied Materials
|
Applied Materials |
P5000 |
in Production Tools
P5000 Deposition Tool P500030:P500030 Teos Prozess We sell this tool without chambers.
|
1
|
|
|
F*N* |
Villach, Carinthia |
|
|
219220
|
Applied Materials
|
Applied Materials |
P5000 |
in Production Tools
Amat P5000 CVD Tool:P500051 Tool with 2 Etch Chambers and 2 Teos Chambers
|
1
|
|
|
N* |
Villach, Carinthia |
|
|
209403
|
Applied Materials
|
Applied Materials |
P5000 |
in Production Tools
P5000 Depositiontool :P500020 CVD Tool with 4 Chambers
2 Chambers Etch, 2 Chambers CVD
SILAN
|
1
|
|
|
|
Villach, Carinthia |
|
|
209423
|
Applied Materials
|
Applied Materials |
P5000 |
in Production Tools
P5000 Depositiontool P500045:P500045 4 Chambers
2 Chambers Etch, 2 Chambers CVD
Teos
|
1
|
|
|
|
Villach, Carinthia |
|
|
209425
|
Applied Materials
|
Applied Materials |
P5000 |
in Production Tools
P5000 Depositiontool P500049:P500049 4 Chambers
2 Chambers Etch, 2 Chambers CVD
Teos
|
1
|
|
|
|
Villach, Carinthia |
|
|
210024
|
Applied Materials
|
Applied Materials |
NanoSEM 3D |
in Microscopes
Applied Materials NanoSEM 3D, 300mm wafers, CD SEM:Applied Materials NanoSEM 3D, 300mm wafers, CD SEM
|
1
|
|
|
|
Burlington, Vermont |
|
|
213282
|
Applied Materials
|
Applied Materials |
NanoSEM 3D |
in Microscopes
Applied Materials NanoSEM 3D, 300mm wafers, CD SEM:Applied Materials NanoSEM 3D, 300mm wafers, CD SEM Installed. Operational. Vintage : 2004 S/N : U-667
|
1
|
|
|
|
Singapore |
|
|
213283
|
Applied Materials
|
Applied Materials |
NanoSEM 3D |
in Microscopes
Hitachi, S-9380, CD-SEM, 300mm:Hitachi, S-9380, CD-SEM, 300mm Installed Operational. S/N : U-664 Vintage : 2004
|
1
|
|
|
|
Singapore |
|
|
213284
|
Applied Materials
|
Applied Materials |
NanoSEM 3D |
in Microscopes
Hitachi, S-9380, CD-SEM, 300mm:Hitachi, S-9380, CD-SEM, 300mm Installed. Operational. Vintage : 2004 S'N : U-666
|
1
|
|
|
|
Singapore |
|
|
201207
|
Applied Materials
|
Applied Materials |
SemVision CX |
in Microscopes
Applied Materials, SEMVision CX, 200mm,:Applied Materials, SEMVision CX, 200mm,
S/N : W790
|
1
|
|
|
|
Burlington, Vermont |
|
|
180474
|
Applied Materials
|
Applied Materials |
NanoSEM 3D |
in Microscopes
Applied Materials NanoSEM 3D, 300mm wafers, CD SEM:MULTIPLE UNITS AVAILBLE. PLEASE INQUIRE.
SEM - Critical Dimension (CD) Measurement Currently configured for 300mm wafers CE Marked Install Type: Stand Alone Cassette Interface: • (3) 300mm FOUP Roll-Around Ergo-Station w/Touch-Screen Status Lamp Options: • Slope Reconstruction • CH Analysis • Profile Grade • Discrete Inspection • Defect Review • ARAMS (ES8) Power Requirements: V 120/208, 8A, Single Phase / 3-Phase, 5-Wire, Freq 50/60Hz Software Options: • Slope Reconstruction • CH Analysis • Profile Grade • Discrete Inspection • Defect Review • ARAMS (ES8
|
1
|
|
|
|
East Fishkill, New York |
|
|
180514
|
Applied Materials
|
Applied Materials |
NanoSEM 3D |
in Microscopes
Applied Materials NanoSEM 3D, 300mm wafers, CD SEM:Applied Materials NanoSEM 3D, 300mm wafers, CD SEM
MULTIPLE UNITS AVAILABLE. PLEASE INQUIRE.
SEM - Critical Dimension (CD) Measurement Currently configured for 300mm wafers CE Marked Install Type: Stand Alone Cassette Interface: • (3) 300mm FOUP Roll-Around Ergo-Station w/Touch-Screen Status Lamp Options: • Slope Reconstruction • CH Analysis • Profile Grade • Discrete Inspection • Defect Review • ARAMS (ES8) Power Requirements: V 120/208, 8A, Single Phase / 3-Phase, 5-Wire, Freq 50/60Hz Software Options: • Slope Reconstruction • CH Analysis • Profile Grade • Discrete Inspection • Defect Review • ARAMS (ES8 Tool ID: KA03
|
1
|
|
|
|
East Fishkill, New York |
|
|
178310
|
AMAT
|
AMAT |
Uvision 200 |
in Optical Inspection Equipment
Applied Materials, Uvision 200, Bright Field Inspection, 300mm:Manufactured in 2005; Status: Bagged and Skidded
|
1
|
|
|
|
Taichung, Taichung City |
|
|
205259
|
Applied Materials
|
Applied Materials |
Uvision 5 |
in Optical Inspection Equipment
Applied Materials, Uvision5, Bright Field Inspection, 300mm:Applied Materials, Uvision5, Bright Field Inspection, 300mm
|
1
|
|
|
|
Malta, New York |
|
|
204923
|
Applied Materials
|
Applied Materials |
Dfinder2 |
in Clean Room Equipment
Applied Materials, DFinder2, 300mm Particle Counter:Applied Materials, DFinder2, 300mm Particle CounterS/N : T3513 Bagged & Skidded in Warehouse
|
1
|
|
|
|
Singapore |
|
|
204924
|
Applied Materials
|
Applied Materials |
Dfinder2 |
in Clean Room Equipment
Applied Materials, DFinder2, 300mm Particle Counter:Applied Materials, DFinder2, 300mm Particle CounterS/N : T3515 Bagged & Skidded in warehouse
|
1
|
|
|
|
Singapore |
|
|
199313
|
Applied Materials
|
Applied Materials |
Centura Etch, DPS Minos |
in Plasma Processing Equipment
Applied Materials, Centura Etch, DPS Minos, 300mm:Applied Materials, Centura Etch, DPS Minos, 300mm MANY PARTS MISSING !!!
|
1
|
|
|
|
East Fishkill, New York |
|
|
202929
|
Applied Materials
|
Applied Materials |
Centura Enabler |
in Plasma Processing Equipment
Applied Materials, AMAT, Enabler, Centura, 300mm Etch:Applied Materials, AMAT, Enabler, Centura, 300mm Etch In Fab Idle.
|
1
|
|
|
|
Dresden, Saxony |
|
|
178357
|
AMAT
|
AMAT |
Centura |
in Plasma Processing Equipment
Applied Materials, Etch, Centura Carina Chamber 300mm:Tool ID : ETX2291-c
Chamber Only.
Carina Etch Chamber.
Chamber Materials: ADVANCED CERAMIC
Lid Materials: AG 1000
Process Ring: QUARTZ SINGLE RING
Plasma Exposed Chamber Oring: KALREZ
Cathode Temperature Range: 130 TO 250C
Carina Etch Swap Kit: 1
Chamber Viewport: STANDARD VIEWPORT
Endpoint Type: EyeD IEP
CCM Cover: NO
Location is Malta, NY.
|
1
|
|
|
F* |
Malta, New York |
|
|
182387
|
Applied Materials
|
Applied Materials |
Enabler, Centura, 4 Chamber Etch |
in Plasma Processing Equipment
Applied Materials, AMAT, Enabler, Centura, 300mm Etch, :Applied Materials, AMAT, Enabler, Centura, 300mm Etch,
Dry Etch, Bx-, Cx-, E1 layers, 300mm wafers, 32nm BD/SICOH Etch
MULTIPLE UNITS AVAILABLE: Please inquire.
|
1
|
|
|
|
Dresden, Saxony |
|
|
212268
|
Applied Materials
|
Applied Materials |
Centura AP |
in Plasma Processing Equipment
Applied Materials, Centura AP, 300mm, Etch, AdvantEdge G5:Applied Materials, Centura AP, 300mm, Etch, AdvantEdge G5 4 Chambers In the Fab, Connected. 2010 Vintage S/N : 422049 Bitline etch.
|
1
|
|
|
|
Dresden, Saxony |
|
|
208445
|
Applied Materials
|
Applied Materials |
Centura DPS |
in Plasma Processing Equipment
Applied Materials, Centura Etch, DPS Minos/Carina/ Axiom, 300mm:Applied Materials, Centura Etch, DPS Minos/Carina/ Axiom, 300mm B-chamber is a Minos chamber, essentially a poly etcher D-chamber is a resist strip chamber, called an Axiom A-chamber is a Minos, poly and the TiN Gate etch C-chamber, also known as a Carina or hot chuck, trims the TiN to give undercut In warehouse, Bagged & Skidded DOM : 2006 S/N : 412229
|
1
|
|
|
|
East Fishkill, New York |
|
|
195983
|
Applied Materials
|
Applied Materials |
Elite MS MC |
in Inspection Equipment
Applied Materials, ELITE M5 MC, 300mm, e-Beam Inspection:Applied Materials, ELITE M5 MC, 300mm, e-Beam Inspection
iii Multiple Units Available. Please inquire !!!
|
1
|
|
|
|
Dresden, Saxony |
|
|
201133
|
Applied Materials
|
Applied Materials |
Vantage |
in Production RTP Tools
Applied Materials, Vantage, Vulcan, RTP, 300mm :Applied Materials, Vantage, Vulcan, Spike RTP, 300mm
2 Chamber System
S/N : 426995
|
1
|
|
|
F* |
Dresden, Saxony |
|
|
201134
|
Applied Materials
|
Applied Materials |
Vantage Vulcan |
in Production RTP Tools
Applied Materials, Vantage, Vulcan, RTP, 300mm :Applied Materials, Vantage, Vulcan, RTP, 300mm
2 Chamber System G3 server system.
S/N : 429402
|
1
|
|
|
F* |
Dresden, Saxony |
|
|
203102
|
Applied Materials
|
Applied Materials |
Vantage Vulcan |
in Production RTP Tools
Applied Materials, Vantage, Vulcan, RTP, 300mm:Applied Materials, Vantage, Vulcan, RTP, 300mm S/N : 1095-13210/1
|
1
|
|
|
|
Singapore |
|
|
218561
|
Applied Materials
|
Applied Materials |
Octane G2 Assy |
in Production Equipment
AMAT, Octane G2 assy, SEM server, S/N1421EB:AMAT, Octane G2 assy, SEM server, S/N1421EB Hard drives removed. PC unable to boot.
|
1
|
|
|
|
Burlington, Vermont |
|
|
218562
|
Applied Materials
|
Applied Materials |
Octane G2 Assy |
in Production Equipment
AMAT, SEM server, S/N 00572:AMAT, SEM server, S/N00572 Hard drives removed.
|
1
|
|
|
|
Burlington, Vermont |
|
|
|
Log in
View prices in $ or ... 
View
Search-by-Specs 
reference document attached
Group Listings into sub-categories 
