Added |
 |
Item ID |
Photo |
Short Description |
Product Type / Details |
#
|
Price |
Notes |
Location |
Make |
Model |
|
|
$ |
|
Sep 26 |
 |
243882
|
LOT SALE OF 9 CROWN FORKLIFTS - NO BATTERIES
|
LOT SALE OF 9 CROWN FORKLIFTS - NO BATTERIES |
in Forklifts and Accessories
LOT SALE OF 9 CROWN FORKLIFTS - NO BATTERIES:No batteries included. More pictures available upon request. Located @ Kendallville, Indiana. Viewing before bidding on an item is encouraged. Bidding Closes on Dow’s acceptance of a qualifying bid. DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS LOAD OUT: This lot will be loaded onto buyer's truck free of charge. Buyer is responsible for securing the load and logistics. 1 | FC4515-50 | 9A155372 | EE-rated | 4650 | 2007 | 16 | 2 | FC4540-60 | 9A155371 | Rotator w/ clamp | 4850 | 2007 | 16 | 3 | FC4040-50 | 9A141272 | EE-rated | 3750 | 2006 | 17 | 4 | SC4540-40 | 9A148052 | Rotator | 2950 | 2006 | 17 | 6 | FC4010-50 | 9A149119 | | 3500 | 2005 | 18 | 11 | SC4520-35 | 9A148214 | Rotator | 3250 | 2008 | 15 | 14 | FC4020-55 | 9A136562 | 3-stage 241 in. mast / rotator w/clamp | 4500 | 2005 | 18 | 15 | SC4540-40 | 9A162014 | EE-rated | 3700 | 2008 | 15 | 16 | SC4540-40 | 9A163236 | EE-rated | 3700 | 2008 | 15 |
|
1
|
lot
|
|
N* |
Kendallville, Indiana |
|
Sep 26 |
 |
243881
|
LOT SALE - 8 PRESTOLITE AMETEK ULTRA MAXX CHARGERS
|
LOT SALE - 8 PRESTOLITE AMETEK ULTRA MAXX CHARGERS |
in Forklifts and Accessories
LOT SALE - 8 PRESTOLITE AMETEK ULTRA MAXX CHARGERS:8 Prestolite Ametek Ultra Maxx chargers. Located in Kendallville, IN Serial Number | 308CS68367 | 410CS83591 | 407CS58728 | 406CS48246 | 406CS48245 | 407CS58727 | 406CS47242 | 408C569577 |
Viewing before bidding on an item is encouraged. Bidding Closes on Dow’s acceptance of a qualifying bid. DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS LOAD OUT: This lot will be loaded onto buyer's truck free of charge. Buyer is responsible for securing the load and logistics.
|
1
|
lot
|
|
N* |
Kendallville, Indiana |
|
Sep 26 |
 |
243876
|
Canon
|
Canon |
I5500iZ |
in Lithography Equipment
CANON I5500iZ 300mm (12"):- hardware changes in reticle loading sub-system - hardware changes in wafer loading sub-system - hardware changes in operation-console sub-system - saved all machine-related software components to a MO disk - harddisk removed from equipments computer workstation Estimated Move Out Date: 01.04.24 Appearance: good // Function: need to repair
|
1
|
|
|
N* |
Dresden, Saxony |
|
Sep 26 |
 |
243874
|
Tel
|
Tel |
ACT12 |
in Lithography Equipment
TEL ACT12 Track 12 Zoll: -12 RDS Resist Pumps installed, 4 in use (status of the other pumps is unknown) -2 IC Coatercups installed -Machine is sold with the following subcomponents - Powersupply, TC-Rack, TH-Controller (ESA-S-C-02), External Chem. Cabinet -Clean Hard Disk with OEM Operation system and Machine parameters Estimated Move Out Date: 01.04.24 Appearance: good //function: working
|
1
|
|
|
N* |
Dresden, Saxony |
|
Sep 21 |
 |
243683
|
Olympus
|
Olympus |
BH2 |
in Pharmaceutical Laboratory and Scientific Equipment
|
1
|
|
|
N* |
Regensburg, Bavaria |
|
Sep 20 |
 |
243582
|
Zeiss
|
Zeiss |
Zeiss 475052 |
in Pharmaceutical Laboratory and Scientific Equipment
OM Zeiss 475052:Completeness: Partial
|
1
|
|
|
N* |
Regensburg, Bavaria |
|
Sep 20 |
 |
243581
|
Olympus
|
Olympus |
Olympus BH-2II |
in Pharmaceutical Laboratory and Scientific Equipment
OM Olympus BH-2II:completeness: partial
|
1
|
|
|
N* |
Regensburg, Bavaria |
|
Sep 19 |
 |
243576
|
ISM Industrie Servic
|
ISM Industrie Servic |
n.a. |
in Wet Processing Equipment
Workbench for the removing of photo resists:Stainless steel workbench with ultrasonic bath for the removing of photoresisted silicon-wafers. The bench was built as custom-made product. The system is still in use, therefore there is the possibility for a sale on inspection. Capable of processing up to 6" wafers, delivery of additional accessories is possible. If there is a seriously buying interest, the technical specifications could be send.
|
1
|
|
|
N* |
Warstein, North Rhine-Westphalia |
|
Sep 19 |
 |
243573
|
Axcelis Technologies
|
Axcelis Technologies |
Optima MD |
in Ion Implantation Equipment
Axcelis, Optima MD, 300mm, s/n: 083012, IMP202:Axcelis, Optima MD, 300mm, s/n: 083012 Medium Current Implant
|
1
|
|
|
N* |
Dresden, Saxony |
|
Sep 15 |
 |
243365
|
FICO AMS-11-MR1 FC-17 scrap
|
FICO AMS-11-MR1 FC-17 scrap |
in Semiconductor Manufacturing Equipment
FICO AMS-11-MR1 FC-17 scrap:FICO AMS-11-MR MOLDING | 304008003526 0000 | FICO MOLD DIE | 304008003526 0001 | Nantong Smile Perforated connector | 304008001238 0000 | MB CME3060/TI2280 DF/TI | 304008004924 0000 | MB V60 Membrane dosing head 16-fold dosinghead | 304008004924 0001 |
|
1
|
|
|
N* |
Regensburg, Bavaria |
|
Sep 15 |
 |
243364
|
Toyota
|
Toyota |
8FGU25 |
in Forklifts and Accessories
Toyota 8FGU25 forklift:Bids accepted through Oct 4, 2023 - DuPont Asset #067-05289 Toyota 8FGU25 forklift base model capacity 5000 Lbs @ 24" load center actual capacity based on quoted specifications 4650 Lbs @ 24" load center to 189" MFH 40" ita hook type carriage 42" X 5" X 1.6" class ii forks 4 way valave with 3rd & 4th function internal hosing cascade 40" integral sideshifting fork positioner 2.2L 4Y-ECS gasoline engine 7.00-12PR pnematic front tires 6.00-9-10 PR pneumatic rear tires strobe light rear combination lights led low profile headlights keyless ignition switch backup alarm fire extinguisher install rear work light compatible with LPS truck
forks changed from 42" to 72" and 48" extensions added 2/2016
|
1
|
|
|
N* |
Wilmington, Delaware |
|
Sep 14 |
 |
243313
|
Hitachi Kokusai Elec
|
Hitachi Kokusai Elec |
DJ-1236VN-DF |
in LPCVD Furnaces
HITACHI KOKUSAI, DJ-1236VN-DF, 300mm, s/n: DN23300, FVX2488:HITACHI KOKUSAI, DJ-1236VN-DF, 300mm, FVX2488 Vertical LPCVD Furnace
|
1
|
|
|
N* |
Malta, New York |
|
Sep 13 |
 |
243278
|
EKRA
|
EKRA |
XM |
in Semiconductor / Hybrid Assembly Equipment
Screen & Stencil Printer Ekra (Asys Group):The XM is a manual screen and stencil printer dedicated to small batch size production and prototyping purposes. The sideways guided squeegee traverse and the adjustable squeegee pressure ensure a constant, high quality print. Simple operation and short set-up times all belong to the application oriented concept. Stiff as well as flexible materials such as PCBs, glass, ceramic or metal up to a thickness of 30 mm can be printed. Due to these characteristics the XM print system is the ideal application for small batch series and for prototyping.
|
1
|
|
|
N* |
Regensburg, Bavaria |
|
Sep 12 |
 |
243275
|
Metler Toledo
|
Metler Toledo |
05-057 |
in Materials Handling and Storage Equipment
Metler Toledo Model 05-057 Weight Scale:Bids accepted through Oct 4, 2023 Metler Toledo Weight Scale Model 05-057 working fair condition
|
1
|
|
|
N* |
Hayward, California |
|
Sep 8 |
 |
243166
|
Toyota
|
Toyota |
8HBW23 |
in Pallet Jacks
Toyota 8HBW23 Material Handling EQ-84 :Bids accepted through Oct 4, 2023 - DuPont asset #066-02802 Toyota 8HBW23 electric walkie pallet truck base model capacity 4500 Lbs @24" load center actual capacity based on equipment specifications 4500 Lbs @ 24" load center forks 60" X 20" (actual 57.5" X 195") 24 volt electrical system key switch truck not equipped with an electronic touch pad keyless entry system. Truck parameters will be the same for all operators industrial battery restraint nexsys maintenance free battery / charger pak polyurethane torsion block casters dupont toe guard TSDR
SN 8HBW23-18602
|
1
|
|
|
N* |
Circleville, Ohio |
|
Sep 8 |
 |
243165
|
Toyota
|
Toyota |
8HBW23 |
in Pallet Jacks
Toyota 8HBW23 Material Handling EQ-84 :Bids accepted through Oct 4, 2023 - DuPont asset# 066-02801 Toyota 8HBW23 electric walkie pallet truck base model capacity 4500 Lbs @24" load center actual capacity based on equipment specifications 4500 Lbs @ 24" load center forks 60" X 20" (actual 57.5" X 195") 24 volt electrical system key switch truck not equipped with an electronic touch pad keyless entry system. Truck parameters will be the same for all operators industrial battery restraint nexsys maintenance free battery / charger pak polyurethane torsion block casters dupont toe guard TSDR bad battery
|
1
|
|
|
N* |
Circleville, Ohio |
|
Sep 8 |
 |
243164
|
Toyota
|
Toyota |
8HBW23 |
in Pallet Jacks
Toyota 8HBW23 Material Handling EQ-84 :Bids accepted through Oct 4, 2023 - DuPont asset# 066-02800 Toyota 8HBW23 electric walkie pallet truck base model capacity 4500 Lbs @24" load center actual capacity based on equipment specifications 4500 Lbs @ 24" load center forks 60" X 20" (actual 57.5" X 195") 24 volt electrical system key switch truck not equipped with an electronic touch pad keyless entry system. Truck parameters will be the same for all operators industrial battery restraint nexsys maintenance free battery / charger pak polyurethane torsion block casters dupont toe guard TSDR
SN [INVALID]d from 8HBW23-18602 to 8HBW23-18600
|
1
|
|
|
N* |
Circleville, Ohio |
|
Aug 22 |
 |
242948
|
Axcelis Technologies
|
Axcelis Technologies |
GSD-200E2 |
in Ion Implantation Equipment
AXC GSD-200E2:High Current Implant Flow Hood missing, Box Table missing Lower Machine Front Panels missing (below the Table) no Roughpumps included (Edwards Setup) no Spares
|
1
|
|
|
N* |
Villach, Carinthia |
|
Aug 21 |
 |
242940
|
Kufner
|
Kufner |
Batch Etching Basins |
in Wet Processing Equipment
Dip-etch wet benchs:4x Dip-etch wet bench (1998) Complete dip acid etching unit manufactured by Kufner, Germany. The system is still in use, therefore there is the possibility for a sale on inspection. Capable of processing bonded si-wafers up to 80mm diameter. Delivery of additional accessories is possible. If there is a seriously buying interest, the technical specifications could be send.
|
1
|
|
|
N* |
Warstein, North Rhine-Westphalia |
|
Aug 17 |
 |
242857
|
KLA
|
KLA |
eS32 |
in Test & Measurement Equipment
KLA eS32 E-beam Wafer Inspection 200mm:eS32 is a top-of-the-line mask and wafer inspection equipment that is designed to meet the most stringent quality standards for semiconductor product manufacturing. This system provides comprehensive, high-resolution inspection of both masks and wafers with unparalleled accuracy. The unit uses a proprietary optical probe to scan masks and wafers to detect defects and irregularities with a resolution reaching down to 1 micron. This high-precision scanning allows for comprehensive inspection of the entire surface of both the mask and wafer. The machine also includes powerful image processing and analysis algorithms which automatically detect defects, categorize them, and track their locations. KLA eS32 also includes a suite of automated defect correction tools which can rapidly repair standard and complex defects. In addition to its exhaustive defect detection capabilities, this tool also allows for statistical process control (SPC) analysis to ensure production processes maintain consistent quality and accuracy over time. TENCOR ES 32 also includes a user-friendly interface that makes it easy to operate and manage the asset. This user interface is highly customizable, allowing users to quickly change model settings, view detailed inspection reports, and receive real-time notifications of detected defects. In summary, KLA ES 32 is a high-performance mask and wafer inspection equipment that offers superior detection accuracy, automated defect correction, comprehensive statistical process control (SPC) analysis, and an easy-to-use user interface. This system can be used to monitor production lines, resulting in improved manufacturing quality, increased yield, and cost savings.
|
1
|
|
|
N* |
Austin, Texas |
|
Aug 17 |
 |
242852
|
KVA GmbH
|
KVA GmbH |
automatisierte Si-Pellets Ätzbank |
in Wet Processing Equipment
Pellet Edge Batch Etch Tool:Automtic dip-etch bench (2014) Complete dip acid etching unit manufactured by KVA, Austria. The system is still in use, therefore there is the possibility for a sale on inspection. Capable of processing semiconductor devices (Diode, Thyristor) up to 58 mm, delivery of additional accessories is possible. If there is a seriously buying interest, the technical specifications could be send
|
1
|
|
|
N* |
Warstein, North Rhine-Westphalia |
|
Aug 17 |
 |
242851
|
Kufner
|
Kufner |
Batch Etching Basin (KOH) |
in Wet Processing Equipment
Batch Etching Basin (KOH):Complete dip acid etching unit manufactured by Kufner, Germany. The system is still in use, therefore there is the possibility for a sale on inspection. Capable of processing si-wafers after grinding (KOH). Delivery of additional accessories is possible. If there is a seriously buying interest, the technical specifications could be send
|
1
|
|
|
N* |
Warstein, North Rhine-Westphalia |
|
Aug 17 |
 |
242850
|
Balzers
|
Balzers |
BAK760 |
in Deposition Equipment
BAK760 PC101:evaporator Vacuum chamber: BAK 760 with accessories (vaccum pump etc.) for the processing of semiconductor devices (Diode, Thyristor) If there is a seriously buying interest, the technical specifications could be send
|
1
|
|
|
N* |
Warstein, North Rhine-Westphalia |
|
Aug 13 |
 |
242776
|
Optical Gaging Prod
|
Optical Gaging Prod |
Smartscope ZIP 250 |
in Metrology Equipment
|
1
|
|
|
N* |
Regensburg, Bavaria |
|
Aug 3 |
 |
242682
|
Applied Materials
|
Applied Materials |
P5000 |
in Production Tools
P5000:CHAMBER A | x | | Universal CVD | Teos | CHAMBER B | x | | Universal CVD | Teos | CHAMBER D | x | | Universal CVD | Teos |
Tool is sold with three chambers and was used in cleanroom until August 2023
|
1
|
|
|
N* |
Villach, Carinthia |
|
Aug 2 |
 |
242656
|
Applied Materials
|
Applied Materials |
P5000 |
in Production Tools
P5000:CHAMBER A | Universal CVD | Teos | CHAMBER B | Universal CVD | Teos | CHAMBER C | Mark2 | Etch | CHAMBER D | Mark2 | Etch |
The Tool is sold with 4 chambers and was productiv until August 2023
|
1
|
|
|
N* |
Villach, Carinthia |
|